Part Number Hot Search : 
CXA19 7045918 ACTR8021 PE423708 06780 10013 48S15 3013T
Product Description
Full Text Search
 

To Download LP377TYL1-40G Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Cree(R) P4 LED
Model # LP377TYL-40G Data Sheet
40-degree, 7.6 x 7.6 mm LED lamp in amber color with water-transparent lens and stopper
Applications
* * * * Advertising Signs Indicators Traffic Signals Automotive Lighting
Absolute Maximum Ratings (TA = 25C)
Items Forward Current
Note 2
Symbol IF
Note 1
Absolute Maximum Rating 70 200 5 220 -40 ~ +100 -40 ~ +100
Unit mA mA V mW C C
Peak Forward Current Reverse Voltage Power Dissipation
IFP VR PD Topr Tstg Tsol
Operation Temperature Storage Temperature Lead Soldering Temperature
Max. 260C for 3 sec. max. (3 mm from the base of the epoxy bulb)
1. 2.
Notes:
Pulse width 0.1 msec, duty 1/10. A heat sink is recommended if the device is operated at ambient temperatures higher than 25C.
Typical Electrical & Optical Characteristics (TA = 25C)
Characteristics Forward Voltage Reverse Current Dominant Wavelength Symbol VF IR D V 21/2 Condition IF = 70 mA VR = 5 V IF = 70 mA IF = 70 mA IF = 70 mA Unit V A nm mlm deg 584 2000 591 3200 40 Minimum Typical 2.6 Maximum 3.2 100 599
D-CT132.000 Data Sheet: CL
Luminous Flux 50% Power Angle
Subject to change without notice. www.cree.com/ledlamps
Standard Bins for LP377TYL-40G (IF = 70 mA)
Lamps are sorted to luminous flux (V), VF and dominant wavelength (D) bins shown. Orders for LP377TYL1-40G may be filled with any or all bins contained as below. All luminous flux (V), VF and dominant wavelength (D) values shown and specified are at IF = 70 mA. X2 X3 X4 X5 X6 L or above K
J
H
G 584 nm 587 nm 590 nm 596 nm
593 nm
599 nm
Dominant Wavelength (D)
Rank Luminous Flux Forward Voltage (VF) Rank Voltage
V4
G
2000-3000 mlm
H
2500-3600
J
3000-4200 mlm
K
3500-4800 mlm
V5 2.4-2.6 V
V6 2.6-2.8 V
V7 2.8-3.0 V
V8 3.0-3.2 V
2.2-2.4 V
Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. No tolerance of measurement of luminous flux. 3. Tolerance of measurement of dominant wavelength is 1 nm. 4. Tolerance of measurement of VF is 0.05 V. 5. Packaging methods are available for selection; please refer to the "Cree LED Lamp Packaging Standard" document. 6. Please refer to the "Cree LED Lamp Reliability Test Standards" document for reliability test conditions. 7. Please refer to the "Cree LED Lamp Soldering & Handling" document for information about how to use this LED product safely.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
2
CLD-CT32.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Model No. Doc. No.
LP377TYL1-40G 12 23Sep04
Graphs Graphs
If (mA) -60 Vr(V) -50 -40 -30 -20 -10 0.0 -10.0 -20.0 -30.0 -40.0 Vf(V) -50.0 Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE.
100.0 80.0 60.0 40.0 20.0
0.0 2.0
2.2 2.4 2.6 2.8 3.0 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE.
2.5 2.0 1.5 1.0 0.5 0.0 0.0 If(mA) 20.0 40.0 60.0 80.0 100.0
Half Power WL=20nm Domi WL= 591nm I (RELATIVE LUMINOUS FLUX) 100% 75% 50% 25% WL(nm) 500 600 700 800 900 FIG.4 RELATIVE LUMINOUS FLUX VS. WAVELENGTH. 0% 400
FIG.3 RELATIVE LUMINOUS FLUX VS. FORWARD CURRENT.
100 80 60 40 20 0
IF(mA)
50% Power Angle : 40 Ie(%)
0 100%
80%
60%
40%
Ta( C) 0 20 40 60 80 100 120
-90 -60 -30 0 30 60 90
20% 0%
FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=120 C)
FIG.6 FAR FIELD PATTERN
Items Prepared by Checked by Approved by ECN#
Signatures
LiuZM AldosinLi David
Date
2004/09/23 2004/09/23 2004/09/23 DOC. No. J 16Jul03 K 11Nov03 12 23Sep04
Revision History
CHANGE DESCRIPTION Cancel VF(min). add V8 & X6 PD from 150 to 220; Change FIG.5
Add ESD and Notes; Change FIG.1&3&5; Change
V
ECN-H20040261
&
D
Rank form.
Data is subject to change without prior notice. Copyright@2002 Cotco International Ltd. Obsoletes Doc: K 11Nov03. 3
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
CLD-CT32.000
4/4
COTCO-D-074
REV.1
Mechanical Dimensions
Model No. LP377TYL1-40G Doc. No. 12 23Sep04 All dimensions are in mm. Tolerance is 0.25 mm unless otherwise noted.
An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max.
Dimension Drawing
maximum ting 0 0
Unit mA mA V
0 +100 +100
mW
C C
C forNotes Max. 5 sec
base of the epoxy bulb)
RoHS Compliance
threshold recommended. Please contact or are used in an exempted application, in accordance with EU Direcand 50mA are limits) permitted for such substances, COTCO sales representative for more tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim
The of environmentally he devicelevels restrictedat ambient this product are below thethan 25 deg C. For long term referred to asor is operated materials sensitive, persistent biologically toxic (PBT), persistent values (also temperatures higher maximum concentration organic pollutants (POP), the otherwise in
= 2 should s ( TaUsers 5C) be cautioned not to stare at the light of this LED product. The bright light can damage the eye. ondition
F
Min.
Typ.
Max.
Unit
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Copyright to change and = 70mA (c) 2007 Cree, Inc. All rightsof Cree, Inc. information in this document is subject3.2 without notice. Cree V the --- reserved. The 2.6 Cree logo are registered trademarks
4
CLD-CT32.000
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:
Standard/Custom
0: Standard C: Custom
VF
0: Full forward voltage distribution 1~9, A~Z . . . : special request *
Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV
1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request *
Packing type Product P/N
0: Standard = tube pack 1~9, A~Z . . . : special request *
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number LP377TYL1-40G-00001 LP377TYL1-40G-00011 Description P4 40 Amber 591nm, FULL RANK, Tube Pack P4 40 Amber 591nm, H or above, Tube Pack
* Please contact your Cree representative about the availability of non-standard kits.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
5
CLD-CT32.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps


▲Up To Search▲   

 
Price & Availability of LP377TYL1-40G

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X